Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

IDM with Funk RADIUS

SOLVED
Go to solution
Mohieddin Kharnoub
Honored Contributor

IDM with Funk RADIUS

Hi everybody

Its stated that to use IDM 2.0 with Funk’s Steel Belted RADIUS, we need to install 2 of .dll files.

But where to install? is it in the IDM directory ? or in the FUNK's one ? and to which directory we have to install?

Can we get the procedure for this please?

Thanks !!!
Science for Everyone
2 REPLIES
Sameer_Nirmal
Honored Contributor
Solution

Re: IDM with Funk RADIUS

Those two DLL files are required to be installed under c:\radius\service directory. Then you need to put the entry of those DLL files in the respective .aut files.

Refer following link for details about PEAP and TTLS modules.
https://download.juniper.net/software/aaa_802/public/sbr/docs/SBR54REF.pdf

Depending on the version of SBR you are using, install the respective DLL files.
Mohieddin Kharnoub
Honored Contributor

Re: IDM with Funk RADIUS

Thanks Mate

I was looking for such information,i will try that anyway.

I noticed that i have FUNK version 5.4, and the latest dll files provided by ProCurve are for version 5.3.0

I will try it anyway.

Thanks again !!!
Science for Everyone