HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

IPX with VRRP

 
cdf_1
Occasional Contributor

IPX with VRRP

Any one can help on configuring 9308 with IPX with VRRPE or VRRP. Show IPX servers shows the servers, but cannot login to server from the client. Server is Novell Netware 3.1 with Ethernet_II. My edge switches are 5300XL and the servers are to be connected to the 2848. We have multiple VLAN running and the with IP everything is working fine.
2 REPLIES
Olaf Borowski
Respected Contributor

Re: IPX with VRRP

Raj,

VRRP and VRRPE is for IP only. It cannot be used for IPX. IPX works differently anyway in regards to "default" routing. VRRP will provide you with a "redundand" default gatway address for IP, not IPX. What are you trying to do? Maybe you just have problems with IPX routing?

Olaf

cdf_1
Occasional Contributor

Re: IPX with VRRP

not relevant