Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Inter VLAN Routing between HP4204vl and Cisco 1841

Usaia Tawakevou
Frequent Advisor

Inter VLAN Routing between HP4204vl and Cisco 1841

I need to configure my Cisco1841 to do intervlan routing. Have done configuration and I couldnt ping my HP switch from the router and vice versa. Attach herewith is my configuration for both the 1841 and 4204vl. ROuter is using faethernet 0/1 and switch is connected to the router via B20

Hope someone helps

regards
1 REPLY
Greybeard
Esteemed Contributor

Re: Inter VLAN Routing between HP4204vl and Cisco 1841

Hi, I don't see any translation in the config, try adding add ip nat inside to interface. also try Issueing the nehost [route-mgmt]> ping -s on command at the CLI to turn ping on
_________________________________________________
How to assign points on this new forum? Click the Kudos Star!