HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Switches, Hubs, and Modems
Showing results for 
Search instead for 
Did you mean: 

Interconnectivity 10Gb between cisco 3750E and ProCurve 6120G/XG

Occasional Contributor

Interconnectivity 10Gb between cisco 3750E and ProCurve 6120G/XG


In our network architecture we have a cisco 3750E with 10Gb connector unused and recently received a c3000 enclosure with two ProCurve 6120G/XG.

Is possible interconnect this devices (ProCurve 6120G/XG and cisco 3750E) in 10Gb.??

The main objective is trunk or balance network traffic.

If this is possible, I will thank you what we need to do this. kind of connectors, hp cables, sites where i need to red of interoperability matrix.

If this isn't the right forum tell me where can i put this question.


Johnnatan Malpica.
Honored Contributor

Re: Interconnectivity 10Gb between cisco 3750E and ProCurve 6120G/XG

There are multiple options, you can use on the Procurve side a CX4, DAC, SR or LR optics, available here on the Related Options section:


For the C3750, you can use SFP/SFP+/XFP/X2 10Gb connectors, just need to verify compatibility with this switch, here are some examples: