- Community Home
- >
- Networking
- >
- Legacy
- >
- Switches, Hubs, Modems
- >
- Re: Interface down 9300...
Switches, Hubs, and Modems
1753575
Members
6075
Online
108796
Solutions
Forums
Categories
Company
Local Language
юдл
back
Forums
Discussions
Forums
- Data Protection and Retention
- Entry Storage Systems
- Legacy
- Midrange and Enterprise Storage
- Storage Networking
- HPE Nimble Storage
Discussions
Discussions
Discussions
Forums
Forums
Discussions
юдл
back
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
- BladeSystem Infrastructure and Application Solutions
- Appliance Servers
- Alpha Servers
- BackOffice Products
- Internet Products
- HPE 9000 and HPE e3000 Servers
- Networking
- Netservers
- Secure OS Software for Linux
- Server Management (Insight Manager 7)
- Windows Server 2003
- Operating System - Tru64 Unix
- ProLiant Deployment and Provisioning
- Linux-Based Community / Regional
- Microsoft System Center Integration
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Blogs
Information
Community
Resources
Community Language
Language
Forums
Blogs
Go to solution
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО10-11-2006 06:13 AM
тАО10-11-2006 06:13 AM
Solution
Hi Jonathan,
From the output you provided in the first post this doesn't appear to be a STP problem at all. It looks like a physical layer problem.
GigabitEthernet2/4 is down, line protocol is down
The line is down, down and is not receiving in packets.
I would try to isolate this problem before making all the STP changes. I would try the following to isolate the problem.
1. Plug 2/4 into a known working port
2. Switch 2/3 with 2/4 - Does the problem follow the port switch?
3. Try a different GBIC
4. Replace the fiber cable. Use a known good cable
Once the port is up, up it should move to forwarding.
The other STP changes are good. I would recommend 8.0.01e. More fixes included in this version.
If I misunderstood the initial question, let me know.
David
From the output you provided in the first post this doesn't appear to be a STP problem at all. It looks like a physical layer problem.
GigabitEthernet2/4 is down, line protocol is down
The line is down, down and is not receiving in packets.
I would try to isolate this problem before making all the STP changes. I would try the following to isolate the problem.
1. Plug 2/4 into a known working port
2. Switch 2/3 with 2/4 - Does the problem follow the port switch?
3. Try a different GBIC
4. Replace the fiber cable. Use a known good cable
Once the port is up, up it should move to forwarding.
The other STP changes are good. I would recommend 8.0.01e. More fixes included in this version.
If I misunderstood the initial question, let me know.
David
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО10-12-2006 06:58 PM
тАО10-12-2006 06:58 PM
Re: Interface down 9300...
Hi,
Problem is solved!
Have updated 9300 to 08.001c and recreated all of the trunks and route only interfaces.
Didn;t work, so, even though i had already replaced the GBICs with ones i though were working, i tried different ones again!
Turned out to be a faulty GBIC and the two i originally tried were also faulty. All sorted now, still would like to go through the STP config. Will get some notes together.
Many thanks for all your help...
Problem is solved!
Have updated 9300 to 08.001c and recreated all of the trunks and route only interfaces.
Didn;t work, so, even though i had already replaced the GBICs with ones i though were working, i tried different ones again!
Turned out to be a faulty GBIC and the two i originally tried were also faulty. All sorted now, still would like to go through the STP config. Will get some notes together.
Many thanks for all your help...
Where there is a will there is a way...
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО10-12-2006 07:10 PM
тАО10-12-2006 07:10 PM
Re: Interface down 9300...
Great news,
anyway attach drawings and config and we will work it out togther.
Good Luck !!!
anyway attach drawings and config and we will work it out togther.
Good Luck !!!
Science for Everyone
- « Previous
-
- 1
- 2
- Next »
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.
News and Events
Support
© Copyright 2024 Hewlett Packard Enterprise Development LP