HPE Community
Switches, Hubs, and Modems
1752808 Members
6078 Online
108789 Solutions
New Discussion

Issue Telnet and Ping to a J9001A

 
Martin-UK
Occasional Contributor

‎07-24-2009 01:44 AM

‎07-24-2009 01:44 AM

Issue Telnet and Ping to a J9001A

Good morning everyone,

I have got the following problem:

We have got an issue with a J9001A wireless module where by we can't Telnet, Ping and Web Browse to the module (remotly nor on the same subnet), however the module is showing as up on the switch that it is located in and I can go in to the conf t --> Wireless-Service H and I am able to ping anything that is on the same subnet, but can't ping anything else (error message - ping: sendto: Network is unreachable). Currently the only way we have found to fix the problem is to reseat the card.

Has anyone else come across this?? If they have please let me know how to fix it... :)

0 Kudos
1 REPLY 1
Martin-UK
Occasional Contributor

‎09-04-2009 03:23 AM

‎09-04-2009 03:23 AM

Re: Issue Telnet and Ping to a J9001A

Ok solution for this is to add the static 0.0.0.0 route to the wireless module.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.