Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

J8770 A 4707vl routing issue

Andrew Soper
Advisor

J8770 A 4707vl routing issue

Hi

I have three switches, one is the default gateway which is a 4108g. we recently added the 4707 bit it wont route to our offices connected via wan links, so i added the routes, and now i can route problem solved I thought, howver whislt I cna route from the switch, if I connect a client it will not route? most bizarre, the client can reach everything on the local subnet but ping and tracert fail tothe remote sites, evrything from the switch pings and traces fine, woudl wlecome any suggestions.
if it sounds bad, it normally is