JD375A No correct default file to boot!

[Shafiq28]

Hi everyone. please do help me. My colleague accidentally formated the flash memory on this switch. I tried searching for answers online but the answers that I found could not help me. 

[akg7]

Hello,

Which file was deleted from flash?

Hopefully nothing deleted from recycle-bin?

Has the device rebooted? If not then run below command then files will be resotred from recyceel-bun.

<HPE>undelete flash:/

Thanks!

[Shafiq28]

Hello. I think he formated the flash file. The only thing that is shown everytime I try to reboot is basically this: 

********************************************************************************
* *
* HP A5500-48G EI Switch with 2 Interface Slots BOOTROM, Version 707 *
* *
********************************************************************************
Copyright (c) 2010-2011 Hewlett-Packard Development Company, L.P.
Creation date : May 16 2011, 11:11:51
CPU Clock Speed : 533MHz
BUS Clock Speed : 133MHz
Memory Size : 256MB
Mac Address : d07e2870f61e

Press Ctrl-B to enter Boot Menu... 0
Auto-booting...

No correct default file to boot!

Password:

BOOT MENU

1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify bootrom password
6. Enter bootrom upgrade menu
7. Skip current configuration file
8. Set bootrom password recovery
9. Set switch startup mode
0. Reboot

Enter your choice(0-9):

[Shafiq28]

I tried uploading  A5500EI-CMW520-R2222P12 by xmodem because I could not use tftp because I could not get an ip. then it displayed this:

BOOT MENU

1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify bootrom password
6. Enter bootrom upgrade menu
7. Skip current configuration file
8. Set bootrom password recovery
9. Set switch startup mode
0. Reboot

Enter your choice(0-9):3
File Number File Size(bytes) File Name
=============================================================================
1 3144 private-data.txt
2(*) 5364 startup.cfg
3 287 system.xml
4 14386432 default_file
Free Space: 17851392 bytes
Please select a default boot file!
(*)-with main attribute
(b)-with backup attribute

What should I do next?

[akg7]

Hi,

It seems software file is missing.

Select option 1 from the menu then select protocol to transfer the software file.

Thanks!

[Shafiq28]

Hi AKG7,

thank you for your reply. Do you know where I can get the software file. I can't seem to find it.

I just found this everytime I tried : A5500_EI_5.20.R2222P12. 

[Shafiq28]

could you also specify which file. Thank you

[akg7 · Accepted solution]

Hi,

What are the options available if you select option 2 from the boot menu?

Do you know which software version was runiing before deleting?

I believe you are trying to upload A5500EI-CMW520-R2222P12.bin file.  If TFTP is not working then transfer through XMODEM.

Below is the link to download:

https://h10145.www1.hpe.com/downloads/DownloadSoftware.aspx?SoftwareReleaseUId=27609&ProductNumber=JD375A&lang=&cc=&prodSeriesId=&SaidNumber=

Thanks!

[Shafiq28]

Hi AKG7,

Thank you for your reply. Previously I tried uploading the file using XMODEM a few times but it failed. I tried using TFTP once before using XMODEM but it showed no respons. After failing using the XMODEM  I tried using TFTP again. I failed on the first try but succeded on the second try. 

Thank you for helping out.