Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

LACP Config Question

SOLVED
Go to solution
DPower
Occasional Advisor

LACP Config Question

Running Procurve 4104gl with G.07.09 flash.

I have a server with 4 Broadcom NIC ports. The Broadcom utility allows you to bind the 4 into one fat pipe. I'm trying to utilize 802.3ad LACP on the switch but it doesn't appear to be working correctly. B1-B4 are the ports I am attempting to bind. B1-B3 show they are in trunk group Dyn2, but port B4 shows it is in trunk group B4.

Is this normal?

Thanks!
2 REPLIES
Lmm_1
Honored Contributor
Solution

Re: LACP Config Question

I will recommend to create the lacp channel manually:

trunk b1-b4 trk# lacp

.Lmm
DPower
Occasional Advisor

Re: LACP Config Question

LMM that did the trick. Thanks for the reply!