LACP blocking port.

[Abhijti]

Hi All,
I am facing problem with the hp 2626 switches that some ports are showing down due to LACP block. on my all ports the Access points are connected. Could you please help me to sort this problem.

Is it required to upgrade the latest firmware version ? currently its showing H.10.38 software version.

thanks in advance !!

===========================- TELNET - MANAGER MODE -============================
I 02/01/90 07:32:53 ports: port 20 is now on-line
I 02/01/90 07:32:55 ports: port 5 is now off-line
I 02/01/90 07:32:57 ports: port 5 is Blocked by LACP
I 02/01/90 07:32:57 ports: port 5 is now on-line
I 02/01/90 07:32:57 ports: port 46 is now off-line
I 02/01/90 07:32:59 ports: port 20 is now off-line
I 02/01/90 07:33:00 ports: port 46 is Blocked by LACP
I 02/01/90 07:33:01 ports: port 20 is Blocked by LACP
I 02/01/90 07:33:01 ports: port 46 is now off-line
I 02/01/90 07:33:03 ports: port 20 is now off-line
I 02/01/90 07:33:03 ports: port 5 is now off-line
I 02/01/90 07:33:04 ports: port 2 is Blocked by LACP
I 02/01/90 07:33:04 ports: port 46 is Blocked by LACP
I 02/01/90 07:33:04 ports: port 46 is now on-line

[Patrick Terlisten]

Hello,

this is a normal behaviour. The port goes into a blocking state and will then change to on-line.

I 02/01/90 07:33:01 ports: port 46 is now off-line
I 02/01/90 07:33:04 ports: port 46 is Blocked by LACP
I 02/01/90 07:33:04 ports: port 46 is now on-line

Regards,
Patrick

[Shadow13]

this is normal yes but u can perevent this bye issuing the command
#int all no lacp
#write mem