Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

LACP dynamic trunks BladeSystem c-Class GBE2c swiches and procurve 2900

Gareth Walters
Occasional Contributor

LACP dynamic trunks BladeSystem c-Class GBE2c swiches and procurve 2900

G'day all,
I have been trying to setup a dynamic LACP trunk with betweeen a procurve 2900 and the gbe2c blade switches. The trunk looks like its working on both the 2900 and the blade switch

server(config)# show lacp

LACP

PORT LACP TRUNK PORT LACP LACP
NUMB ENABLED GROUP STATUS PARTNER STATUS
---- ------- ------- ------- ------- -------
31 Active Dyn1 Up Yes Success
32 Active Dyn1 Up Yes Success
33 Active Dyn1 Up Yes Success
34 Active Dyn1 Up Yes Success


But I can't send data over the trunk.
If I remove the trunk setup it all starts working again....

Attached are the 2 config files.
1 REPLY
Gareth Walters
Occasional Contributor

Re: LACP dynamic trunks BladeSystem c-Class GBE2c swiches and procurve 2900

here is the lacp enable config