Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

LACP

Brijinder Singh
Occasional Visitor

LACP

I have 2 units of 2610 HP Switches with me.I need 100 Mbps bandwidth from point A to Point B (approx 1 KM)for this i have connected 4 RF radios each having 25 MBps bandwidth. I want to run LACP to aggregate the bandwidth. I tried but it is creating loop back. Can you please help me out.
1 REPLY
cenk sasmaztin
Honored Contributor

Re: LACP

hi
you can want LACP trunking connect two switch you can use same speed and media type connection
not carrying LACP with four RF radios other switch

clean all LACP config two switch

spaning tree enable on two switch and connect all RF radio

cenk
cenk