HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

LX and SX connections

 
Mike Carlson_2
Occasional Visitor

LX and SX connections

I have a firewall GigE card with an LX GBIC built in connected to my Procurve 2948. The Procurve has a Mini-GBIC which I think is SX.

I think that we now have a multi-mode fiber with LX on one side and SX on the other. This connection works, but there does seem to be some performance issues (some sort of "cap" of bandwidth throughput). Could this be the an issue?? Does the wavelength mis-match make a difference??
2 REPLIES
SCOOTER
Esteemed Contributor

Re: LX and SX connections

Hello Mike,

Funny that it works, you must have a very short cable between them. Unfortunatly this is not supported. My advice is to put a LX Gbic in the procurve.

Kind regards,

SCOOTER
Stuart Teo
Trusted Contributor

Re: LX and SX connections

What's more wierd? There's no such model as a 2948.
If a problem can be fixed, there's nothing to worry. If a problem can't be fixed, worrying ain't gonna help. Bottom line: don't worry.