Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Log in Banner

Ronnie Hamilton_1
Frequent Advisor

Log in Banner

Hi ,

is it possible to edit the login banner on an HP switch the way you can with a cisco router .
To basically say "any unauthorised access etc etc"

thanks
Ron
5 REPLIES
Les Ligetfalvy
Esteemed Contributor

Re: Log in Banner

Yes, no, maybe...
What model switch and what revision is the code?
Ronnie Hamilton_1
Frequent Advisor

Re: Log in Banner

Hi,

mixture of 4000, 2625, 2650 A & B,4108g, 2824,2524 with various firmware versions. but mostly up to date.

Ron
Matt Hobbs
Honored Contributor

Re: Log in Banner

I believe it is only the 5300, 5400/3500, 6200 and 4200 that currently support this.
Jonathan Axford
Trusted Contributor

Re: Log in Banner

Hi, The 5300 series supports it with the

Switch(Config)# banner motd

command. As does the HP9300 series.

As Matt said, none of the switches you have currently support this, Is something that would be handy though, I have never thought about it, I always use a custom banner when configuring Cisco routers but have always gone without on procurve devices....
Where there is a will there is a way...
Ronnie Hamilton_1
Frequent Advisor

Re: Log in Banner

cheers for that

I guess its a no show for the banners

Ron