Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

MSM-422 Max Clients

SOLVED
Go to solution
Shadow13
Respected Contributor

MSM-422 Max Clients

How many users can the MSM-422 AP handle when controlled by MSM-760 ??

or it depends on the MSM-760 ?

and also how to make w redundancy between 2 MSM-760 controllers ?


Is there any configuration to make the APs discovery process go faster ?
2 REPLIES
Sietze Reitsma
Respected Contributor
Solution

Re: MSM-422 Max Clients

How many users can the MSM-422 AP handle when controlled by MSM-760 ??

Only guest traffic flows through the controller. All other traffic is distributed. so in theory the number of clients an AP can handle.


or it depends on the MSM-760 ?
Only L3 roaming and guest traffic depends on the controller.


and also how to make w redundancy between 2 MSM-760 controllers ?

The current implementation is not ideal, but not really an issue because the APs can run autonomous if they lose connection with the controller. Only guest access and L3 roaming is not available. Make sure in this case that 802.1x authentication is provided by the AP and not the controller.

HP promised to have a solution to provide also real redundancy for L3 roaming and guest acces. So in fact an always available controller.

Is there any configuration to make the APs discovery process go faster ?
Depends how you discover. There is a sequence how the AP discovers. But maybe you can provision the AP upfront to getter faster access to a controller, discovery sequence will be skipped.
Shadow13
Respected Contributor

Re: MSM-422 Max Clients

Thanks for the reply you have clarified lot of things :D.

Thanks again