Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Mac-Address Authentication on 5400

Tom Hardy
Frequent Advisor

Mac-Address Authentication on 5400

Hello All,

I need to setup mac-address authentication on 5400. I want to create a pool of mac -addresses and authorize them to use any port on the hp switch.

Another thing that i might want to do in the future is to restrict individual port access by mac- address.

Can someone please give me the command to do this.

Thanks
4 REPLIES
Tom Hardy
Frequent Advisor

Re: Mac-Address Authentication on 5400

anyone? :)
Matt Hobbs
Honored Contributor

Re: Mac-Address Authentication on 5400

I've found this document to be very useful for this, same thing works on your ProCurve switches:

http://www.foundrynet.com/pdf/wp-deploying-mac-with-ias.pdf
Muhammed Sathar
Occasional Advisor

Re: Mac-Address Authentication on 5400

Hi,

please check the below link, this may useful to u for MAC authentication...

ftp://ftp.hp.com/pub/networking/software/Security-Oct2005-59906024-Chap03-WebMacAuth.pdf

thanks,
cenk sasmaztin
Honored Contributor

Re: Mac-Address Authentication on 5400

hi Tom
restiricted individual port by mac address

you make very easily this command

example
(config)#port-security a1-a24 learn-mode static address-limit 1 action send-disable

a1-a24 (interfaces )

learn mode static (dynamic learn mac address and switch keep mac address)

address-limit (how match mac address permision on port max.32 mac address )

action send-disable (to want different mac connection port ,is port turn disable state




cenk