Switches, Hubs, and Modems
1747984 Members
4729 Online
108756 Solutions
New Discussion юеВ

Re: Mstp instances with 2 Vlan and 4 switchs

 
SOLVED
Go to solution
D.Blond
Frequent Advisor

Mstp instances with 2 Vlan and 4 switchs

Hi,
Can you confirm config parameters in my attachement.
Thanks.
D.Blond
4 REPLIES 4
Matt Hobbs
Honored Contributor
Solution

Re: Mstp instances with 2 Vlan and 4 switchs

That would be fine for the priorities. You'd also need to set the config-revision and assign VLANs to those instances.

If switch 1 and switch 2 are going to be redundant routers (XRRP or VRRP), then I probably wouldn't bother setting priority values for switches 3 & 4. Leaving them at the default of 8 should be okay.
D.Blond
Frequent Advisor

Re: Mstp instances with 2 Vlan and 4 switchs

switch 3 and switch 4 are going to be redundant router.
D.Blond
DEVYNCK
New Member

Re: Mstp instances with 2 Vlan and 4 switchs

HI Matts,
Vlan 2 is blocked, default vlan is OK.
see attachment.
Thank's
Matt Hobbs
Honored Contributor

Re: Mstp instances with 2 Vlan and 4 switchs

I strongly recommend you update to K.12.51 and I.10.43 which both support the auto-edge-port feature. This will greatly reduce the amount of topology changes your network is currently seeing which will decrease unnecessary flooding.