Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Multiple IP over a vlan on the HP5308XL

BRUNEAU_3
Occasional Visitor

Multiple IP over a vlan on the HP5308XL

Over a vlan, i can't install multiple IP on the interface.
When I try to add a secondary ip address to any of the VLANs on my 5304xl, I see something like this:
HP ProCurve Switch 5304XL(vlan-2)# ip address 10.1.1.1/24 secondary
Invalid input: secondary

In the CD Documentation, this fonction is possible, why i don't start

Do I need to enable something to allow multinetting?

Thanks in advance!

Please excuse me for my english.
1 REPLY
Arimo Laine_2
Valued Contributor

Re: Multiple IP over a vlan on the HP5308XL

Hi.

First make sure you're running the latest firmware. Check the management and configuration guide and addendum, also the FW release notes.

FW and manual downoad page is under www.hp.com/rnd

HTH,
Arimo