Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

NAC 800 authentication against Windows domain

Abdul__
Occasional Contributor

NAC 800 authentication against Windows domain

Hello everyone,

I am trying to configure my NAC 800 to perform 802.1x quarantining and authenticating end users against a Windows domain (2008). The Domain controller is the same server where PCM+ (2.3) and IDM (2.25) are installed.

I have configured the domain and administrator credentials correctly on the NAC. When I try to test the settings, I get the following error:

Test failed: Command "/usr/bin/net ads join -U administrator%******** -W domain.com" exited with non-zero value 255 stderr=[2008/07/09 23:09:20, 0] utils/net_ads.c:ads_startup(289) ads_connect: Server not found in Kerberos database

Is this a Server 2008 issue or a ads issue?
1 REPLY
Pieter 't Hart
Honored Contributor

Re: NAC 800 authentication against Windows domain

I would suggest you need to authorize the NAC server on the domain (as you would for a DHCPserver, DNS etc).