New VLAN not working

[Usaia Tawakevou]

I got a current setup with 6 VLAN's all working fine. I did add another VLAN 7 and and configure 2 ports for that VLAN, plug in 2 laptops and assign static ip address on these 2 laptops. It seems like there is no connectivity as echo messages send doesn't get a reply. May be there is something else I should configure on this VLAN. Anyway, I'm doing this from a 4204vl layer 3 switch. I did want to isolate this VLAN so I didn't add in an IP address. Attach herewith is my configuration and any help would really be appreciated

[Gerhard Roets]

Hi Usaia

Mmmm assuming they are in Ports A23 and A24. The laptops traffic should be able to reach each other and go up the two trunk Tk2 and Trk3.

I have a suspicion not 100% sure. Did you try to turn of the host based firewall on the two systems. A lot fo host based firewalls denies ICMP echo replys.

HTH
Gerhard

[Usaia Tawakevou]

Thank you for your response. I did manage to figure that out after a post it :)

[Usaia Tawakevou]

Off the client host based FW