Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

No connection to the Web-Interface 1810G-24

Baier_1
Occasional Visitor

No connection to the Web-Interface 1810G-24

Hello,

i have the following problem:

I can't get a connection to the web-interface of my 1810G-24.
The Laptop is in the same subnetmask (IP 192.168.2.1).
Maybe the former Admin has set another IP of the Switch, is there a possibilty to reset the switch to the factory defaults without using the web-interface?
Thank's in advance for your any help!

Thomas
1 REPLY
Mohammed Faiz
Honored Contributor

Re: No connection to the Web-Interface 1810G-24

Hi,

Yes, you can use the front panel buttons to do this.

From the manual:

1. Using a small, thin tool with blunt ends (such as a paper clip), simultane-
ously press both the Reset and Clear buttons on the front of the switch.
2. Continue to press the Clear button while releasing the Reset button.
3. When all three Mode LEDs (Act, FDx, and Spd) begin to blink, release the
Clear button.

The switch should then be back to the factory default IP address of 192.168.2.10