No device syslog in PCM

[zmichl]

I cant view the device syslog of my procurve switches in PCM.
What do I have to configure in my switches to make them sending syslog to PCM?
I tried

logging severity info
logging

But PCM still does not show the syslog of the device...

[cenk sasmaztin]

(config)# logging (pcm-server ip address)

[Shadow13]

How is PCM reaching the device, is it on the same VLAN or on different VLAN (subnet).

Does the switch has multiple IP addresses ?
are the logs for other switches showing ?
Are all credintials correct between PCM and the device ? (SNMP communities, Manager and operator passwords)

[zmichl]

Yes, other syslogs are showing, but with exact the same config. I can ping PCM from the switch and vice versa. yes the switch has multiple ip-adresses, but the source-ip for traps (i assume the switch takes the same ip as saslog source-ip) is in the same vlan/subnet as PCM. when i do "test communication parameters" in pcm, everything looks fine.

pcm is driving me crazy...

[Shadow13]

can you please post the configuration from the switch and tell me the IP address of the PCM server and how it's connected to the switch or the network please.