Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

OSPF and VRRP Configurations

Phaff
Occasional Advisor

OSPF and VRRP Configurations

Hi

Please can somone assist me with some basic configs that will see the attached diagram work in a triangulated solution. All sites have dual switches running VRRP to provide redundancy between the VLAN's. On the WAN side the connections are Fibre point to point, I have configured VLANs across these links.
What I dont know is what to VRRP and what to OSPF, the "server" vlan is spanned across both switches in each site, do I only configure VRRP for that VLAN and make everything route via a Isolation LAN that is advertised by OSPF?
What about distribute connected VLANs, if they exist on either core will it not create confusion?

Comments would be appreciated..

thanks
Peter
2 REPLIES
Cajuntank MS
Valued Contributor

Re: OSPF and VRRP Configurations

Didn't see any diagram attached.
Phaff
Occasional Advisor

Re: OSPF and VRRP Configurations

mmmm dont know why it never attached...let me try again...