HPE Community
Switches, Hubs, and Modems
1753521 Members
5426 Online
108795 Solutions
New Discussion юеВ

Re: PCM 2.0+ Not scanning configs

 
SOLVED
Go to solution
Jonathan Axford
Trusted Contributor

тАО10-09-2005 11:18 PM

тАО10-09-2005 11:18 PM

Re: PCM 2.0+ Not scanning configs

Ok,

Have checked SNMP strings, they are definately ok, I have run the communication test and attached the output, It says that all is successful.

Where there is a will there is a way...
0 Kudos
Jonathan Axford
Trusted Contributor

тАО10-09-2005 11:20 PM

тАО10-09-2005 11:20 PM

Re: PCM 2.0+ Not scanning configs

OK, Sorted,

The snmp-server was set to operator unrestricted and not manager unrestricted.

Thanks for your help, I just have to go through all the other switches and change them now.....

Cheers!
Where there is a will there is a way...
0 Kudos
Jonathan Axford
Trusted Contributor

тАО10-10-2005 01:06 AM

тАО10-10-2005 01:06 AM

Re: PCM 2.0+ Not scanning configs

I have successfully managed to get all of the devices working, except for the 9300 series.

I have configured the community strings on them, but they don't allow you to specify whether to use 'manager' or 'operator' access. Only if you want the string to be read-only or read-write.

How do i configure the 9300 switches to scan for configs?
Where there is a will there is a way...
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.