Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

PCM+ 2.0 and Traps from AP 420wl

Terry Kirk
Advisor

PCM+ 2.0 and Traps from AP 420wl

Has anyone gotten PCM+ to receive traps from a 420 AP?

It seems that PCM gets the trap and then gets an exception when it tries to process it, but there is no indication of what causes the exception. I have attached a file pcm.log which contains extracts from EVT-EventMgrSever.log. Curiously, the messages above the line of = are from a different AP (10.64.144.47). Its configuration was cloned from the file from 10.64.136.33 though.

The traps are decoded by kiwi syslog daemon which can also handle traps.

I have deleted and re-discovered all access points. The APs are running v2.1 firmware.

Any suggestions would be appreciated.
Terry
1 REPLY
Terry Kirk
Advisor

Re: PCM+ 2.0 and Traps from AP 420wl

Here's the same traps from kiwi syslog.
Terry