HPE Community
Switches, Hubs, and Modems
1752866 Members
4004 Online
108791 Solutions
New Discussion

PCM+ 2.0 and Traps from AP 420wl

 
Terry Kirk
Advisor

‎11-11-2005 03:05 AM

‎11-11-2005 03:05 AM

PCM+ 2.0 and Traps from AP 420wl

Has anyone gotten PCM+ to receive traps from a 420 AP?

It seems that PCM gets the trap and then gets an exception when it tries to process it, but there is no indication of what causes the exception. I have attached a file pcm.log which contains extracts from EVT-EventMgrSever.log. Curiously, the messages above the line of = are from a different AP (10.64.144.47). Its configuration was cloned from the file from 10.64.136.33 though.

The traps are decoded by kiwi syslog daemon which can also handle traps.

I have deleted and re-discovered all access points. The APs are running v2.1 firmware.

Any suggestions would be appreciated.
Terry
0 Kudos
1 REPLY 1
Terry Kirk
Advisor

‎11-11-2005 03:06 AM

‎11-11-2005 03:06 AM

Re: PCM+ 2.0 and Traps from AP 420wl

Here's the same traps from kiwi syslog.
Terry
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.