Switches, Hubs, and Modems
1748195 Members
2724 Online
108759 Solutions
New Discussion юеВ

Re: PCM 3.0 cannot discover 1810G-8 Switch

 
SOLVED
Go to solution
Ralf.Reinartz
Advisor

PCM 3.0 cannot discover 1810G-8 Switch

Hallo all,

our PCM does not diacover the Switches.

In PCM defaults we do not use pulbic as default community.
So I have to discover these Switches manually.


Error Message:

Checking read access community name...
Success...communication established with read community name

Checking write access community name...
Success...communication established with write community name

Communication was successfully established
with device 192.168.162.166

Cannot proceed with Discovery. The device responded neither to a Serial Number nor to a MAC Address query :192.168.162.166

Any Idea?
3 REPLIES 3
cenk sasmaztin
Honored Contributor
Solution

Re: PCM 3.0 cannot discover 1810G-8 Switch

Ralf.Reinartz
Advisor

Re: PCM 3.0 cannot discover 1810G-8 Switch

Hello Cenk,

Today I updated to C03.10.201.

Unfortunally I get the same error Message vor these Switches.
Ralf.Reinartz
Advisor

Re: PCM 3.0 cannot discover 1810G-8 Switch

Cenk,

The way was not so bad.
I had to upgrade Switchs Firmware from 1.6 to 1.14
No PCM is able to discover.

Thanks a lot.