Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

PCM 3.0 cannot discover 1810G-8 Switch

SOLVED
Go to solution

PCM 3.0 cannot discover 1810G-8 Switch

Hallo all,

our PCM does not diacover the Switches.

In PCM defaults we do not use pulbic as default community.
So I have to discover these Switches manually.


Error Message:

Checking read access community name...
Success...communication established with read community name

Checking write access community name...
Success...communication established with write community name

Communication was successfully established
with device 192.168.162.166

Cannot proceed with Discovery. The device responded neither to a Serial Number nor to a MAC Address query :192.168.162.166

Any Idea?
3 REPLIES
cenk sasmaztin
Honored Contributor
Solution

Re: PCM 3.0 cannot discover 1810G-8 Switch

Re: PCM 3.0 cannot discover 1810G-8 Switch

Hello Cenk,

Today I updated to C03.10.201.

Unfortunally I get the same error Message vor these Switches.

Re: PCM 3.0 cannot discover 1810G-8 Switch

Cenk,

The way was not so bad.
I had to upgrade Switchs Firmware from 1.6 to 1.14
No PCM is able to discover.

Thanks a lot.