Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

PCM+ Switch software update broken

Harry STARR
Occasional Contributor

PCM+ Switch software update broken

The ftp server that PCM+ goes to in order to get the updated switch software list is BUSTED!

ftp://ftp.hp.com/pub/networking/software/procurve_firmware.prp

RETR procurve_firmware.prp

and then received this reply

procurve_firmware.prp: No such file or directory.
2 REPLIES
Arimo
Respected Contributor

Re: PCM+ Switch software update broken

Just clicked the link:

// August 29, 2005. Added E.10.04 code for 5300 series
// September 1, 2005. Added M.08.75 code for 3400/6400 series
// September 2, 2005. Added correct code for J8130A.
// September 3, 2005. Fixed 420 entries.
// November 14, 2005. Removed v2.1.0 software for AP420.
// December 16, 2005. Added c2.1.2 software for AP420 and G.07.92 for 4100 series
// January 3, 2006. Updated to G.07.93 for 4100 series, Added H.07.82 for 6108, and H.08.86 for 2600 series.
// January 27, 2006. Updated to E.10.23, F.05.52, I.08.87, and M.08.86, added entry for 2600-8-PWR switch.
// February 14, 2006. Updated M.08.06 filename.
// March 14, 2006. Added v2.1.3 for AP420
...

Seems to work OK.

HTH,

Arimo
HPE Networking Engineer
Harry STARR
Occasional Contributor

Re: PCM+ Switch software update broken

Well! There ya go!
They fixed it!