Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

PCM Traffic Monitor

SOLVED
Go to solution
John Orme
Frequent Advisor

PCM Traffic Monitor

Hi,

I have got PCM installed on a network with 4108 and 2524 switches. In the traffic monitor it shows one of my gigabit servers utilisation very high, 3-400%. There are no other problems on the network it seems that pcm thinks it is a 100mb port. There are never any errors to view on either the switch or in PCM. Does anyone know of a way to tell pcm that it is a gigabit port
4 REPLIES
Les Ligetfalvy
Esteemed Contributor
Solution

Re: PCM Traffic Monitor

Mark Hinchee_1
Occasional Visitor

Re: PCM Traffic Monitor

Not sure about posting a new topic on this but will if i get no responce here.
We have a homogenous HP network consisting of 2600, 4000, and 2500 level switches.
i installed HP's PCM but am unable to see any traffic stats. Do the switched need to be configured in any particular way or is this something on the PCM side?
Les Ligetfalvy
Esteemed Contributor

Re: PCM Traffic Monitor

Since your issue is different from John's you really should start a new topic. John may also have email notification turned on and not want the mail.
John Orme
Frequent Advisor

Re: PCM Traffic Monitor

Hi,

that worked for me. I have upgraded pcm to the latest version and that seems to be a lot better.

Thanks