HPE Community
Switches, Hubs, and Modems
1753373 Members
5239 Online
108792 Solutions
New Discussion

Re: PCM and NNM

 
Piet Wiltenburg
New Member

‎05-11-2006 11:07 PM

‎05-11-2006 11:07 PM

PCM and NNM

We have a configuration with a number of ProCurve Switches managed by PCM+ The PCM server is accessed from a number of client PC's and all works fine.
We are nog trying to integrate PCM with OpenView NNM. The installation went find, when running the client on the NNM station all is ok. When however starting the client from another workstation and connecting to the PCM server on the NNM station we do get the PCM screen but none of the functions are active. Does anyone have any experience with this?
0 Kudos
1 REPLY 1
Sietze Reitsma
Respected Contributor

‎05-14-2006 06:16 AM

‎05-14-2006 06:16 AM

Re: PCM and NNM

I don't have experience with NNM. But the the manual says that you have to run the "NNM Remote Console application". I think that the cobination of the NNM Remote console and the PCM client should work from a remote station.

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.