Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Switches, Hubs, and Modems
Showing results for 
Search instead for 
Did you mean: 


Piet Wiltenburg
Occasional Visitor


We have a configuration with a number of ProCurve Switches managed by PCM+ The PCM server is accessed from a number of client PC's and all works fine.
We are nog trying to integrate PCM with OpenView NNM. The installation went find, when running the client on the NNM station all is ok. When however starting the client from another workstation and connecting to the PCM server on the NNM station we do get the PCM screen but none of the functions are active. Does anyone have any experience with this?
Sietze Reitsma
Respected Contributor

Re: PCM and NNM

I don't have experience with NNM. But the the manual says that you have to run the "NNM Remote Console application". I think that the cobination of the NNM Remote console and the PCM client should work from a remote station.