Switches, Hubs, and Modems
1748034 Members
5116 Online
108757 Solutions
New Discussion юеВ

PCM+ and STP

 
Jaguar
Occasional Advisor

PCM+ and STP

Hi,

Can PCM+ display STP information? For example, if network topology change count increase, is there any way to display that information in PCM+?
3 REPLIES 3
Mohieddin Kharnoub
Honored Contributor

Re: PCM+ and STP

Hi

I'm not sure if you can get STP information such as Topology change count or alert.

But you can show the STP blocked lines, and i believe if you enable the Syslog, and destined it to the PCM, you should get enough info.

Good Luck !!!
Science for Everyone
Jaguar
Occasional Advisor

Re: PCM+ and STP

Hi,
When you said "you can show the STP blocked lines", are you referring to network map?
Mohieddin Kharnoub
Honored Contributor

Re: PCM+ and STP

Hi

Yes in the network map you can see STP blocked lines if you have STP, RSTP

And if you have MSTP, you can see the blocked lines in the network map > Vlans.

Good Luck !!!
Science for Everyone