Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

PCM+ firmware update on 2824 stuck

SOLVED
Go to solution

PCM+ firmware update on 2824 stuck

When updating the secondary firmware image on a 2824 from PCM2.1+, I unchecked "reboot". Now the switch seems fine, but PCM+ still lists it as "updating", with no means of canceling or changing that status. So basically, I can't update it again, if I ever want to. I've tried rebooting the switch, rebooting PCM+ and the PC, re-discovering etc. to no avail.
Can anyone please help?
3 REPLIES
Devon Dawson
Advisor
Solution

Re: PCM+ firmware update on 2824 stuck

Hello Jens,

You should be able to clear out the "Updating" entry for that device by removing the file:
[PCM install dir]\PNM\server\config\fwuSchedule.prp. Once the file is removed restarting your PCM services (or rebooting the management server) should clear out that entry. Note that this will clear out all the contents of your "Software Update Status" dialog but that sounds like what you're trying to accomplish.

I have filed a problem report with the PCM engineers in charge of firmware update so hopefully this problem will be addressed in a future update package.

Take care,
-Devon

Re: PCM+ firmware update on 2824 stuck

Hello Devon.

That worked.
Thank you very much, and merry Christmas

Re: PCM+ firmware update on 2824 stuck

Closing thread - see above