HPE Community
Switches, Hubs, and Modems
1753929 Members
9062 Online
108810 Solutions
New Discussion

Re: PCM lost access after fw upgrade

 
dbis01
Occasional Contributor

‎01-07-2008 03:22 AM

‎01-07-2008 03:22 AM

PCM lost access after fw upgrade

after I upgrade my 2626/2650 switches from 10.38 to 10.45 or 10.50 pcm+ 2.2 loses access to them, with switch showing "snmp access violation" in its logs. reverting back to 10.38 restores access

i'm using snmpv3
i don't change anything in configuration while upgrading/downgrading

please suggest where to look for a solution or workaround
0 Kudos
1 REPLY 1
Matt Hobbs
Honored Contributor

‎01-07-2008 04:32 AM

‎01-07-2008 04:32 AM

Re: PCM lost access after fw upgrade

This is a bug which affects SNMPv3 and has been fixed in a newer release. You will need to contact HP support to get it.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.