Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

PCM lost access after fw upgrade

dbis01
Occasional Contributor

PCM lost access after fw upgrade

after I upgrade my 2626/2650 switches from 10.38 to 10.45 or 10.50 pcm+ 2.2 loses access to them, with switch showing "snmp access violation" in its logs. reverting back to 10.38 restores access

i'm using snmpv3
i don't change anything in configuration while upgrading/downgrading

please suggest where to look for a solution or workaround
1 REPLY
Matt Hobbs
Honored Contributor

Re: PCM lost access after fw upgrade

This is a bug which affects SNMPv3 and has been fixed in a newer release. You will need to contact HP support to get it.