Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

PCM maps

Bill Costigan
Honored Contributor

PCM maps

Does PCM dynamically reconfigure its map as topologies change?

PCM discovered and mapped our switch topology correctly. From the map we discovered that one of the switches was connected to a wrong switch, so we reconnected it to the correct switch.

After a week PCM still showed the switch connected to the wrong switch. The only way we could fix the map was to delete the switch and re-discover it. It now shows the correct connection. Is PCM supposed to re-draw the map itself after some discovery cycle?
2 REPLIES
Stuart Teo
Trusted Contributor

Re: PCM maps

Yes, I believe that PCM redraws the topologies after each discover cycle. How oftent did you configure your PCM to do a discover?
If a problem can be fixed, there's nothing to worry. If a problem can't be fixed, worrying ain't gonna help. Bottom line: don't worry.
Bill Costigan
Honored Contributor

Re: PCM maps

I left it at the default. At least once per day. We also manually ran the discovery. But the map didn't change.