Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

PCM

Bryan Blair
Occasional Visitor

PCM

I am currently running PCM version B.02.201 and the problem that I am having is that when I view the top talkers on the monitored port, it shows the source and destination IP's for each of the top talkers for traffic Received but the Transmitted traffic doesn't show top talkers, it just says "Others" with no source or destination IP.

We have a few different types of switches in our environment but mainly 5300's and 5400's but some work and some don't, even if it has the same firmware.
2 REPLIES
Michael_Breuer
Esteemed Contributor

Re: PCM

Hello Bryan,

I had similar issues with 3500 switches. Please check if you have the mentioned firwmare running:

http://forums13.itrc.hp.com/service/forums/questionanswer.do?threadId=1392934

Cheers,

Michael
Ingentive Networks GmbH
Bryan Blair
Occasional Visitor

Re: PCM

Hi Michael,

Thanks for the link, we are currently running K.13.60 on our 35xx and 54xx switches, I will update one to test and confirm if that resolves the issue. I just found it wierd that it works on some even though its the same model switch and firmware version.

Thanks, will let you know.