Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

PCM2.0+ not picking up all software..

Jonathan Axford
Trusted Contributor

PCM2.0+ not picking up all software..

Hello,

I have just checked on the procurve.com website for latest versions of software for all of my switches.

The PCM+ software has picked up the latest versions for all devices except for the HP Procurve 2600 series.
The PCM software states that the latest version is H.08.72 whilst the procurve.com site advertises H.08.86 as the latest version.

It has successfully picked up the latest versions for all the other switches.

Any ideas?
Where there is a will there is a way...
3 REPLIES
Les Ligetfalvy
Esteemed Contributor

Re: PCM2.0+ not picking up all software..

The list is downloaded as a PRP file and that file is not as current as the web page.
Devon Dawson
Advisor

Re: PCM2.0+ not picking up all software..

Hi Jonathan,

Les is correct (as usual). The software versions that you see from within PCM are encoded in a property file (procurve_firmware.prp) that is updated as soon as PCM support is verified for a new firmware release. Unfortuantely this frequently lags the posting of the firmware to the web.

As a matter of fact, I was just evaluating the new property file this afternoon that includes the H.08.86 entry. Assuming the other tests go as well as mine the file should be posted sometime tomorrow.

-Devon
Jonathan Axford
Trusted Contributor

Re: PCM2.0+ not picking up all software..

Thanks for your info guys, I will wait in anticipation for the file....
Where there is a will there is a way...