Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

PXE and DHCP Snooping

SOLVED
Go to solution
Andreas Bärwald
Occasional Contributor

PXE and DHCP Snooping

We have a implimentation auf 4204 at the Backbone and 2610 onn the Edge.

The Clients make a PXE and when we configured dhcp-snooping on the switches it doesnt work. The DHCP Server is a Windows 2003 R2.

We configured the trusted ports for the DHCP Server himself and the Uplinkports to the edges. On every Switch we have configured the authorized Server (DHCP) and the trusted ports. Set dhcp-snooping globally and for the Vlan 1 the default vlan.

It don't works !

What means option 82 on the switch? Modify the source Adress right?? Are there any modifications on the DHCP necessary? Must option 82 be enabled at the switch?

DHCP Server 192.168.25.1 Clients becomme an IP Adress at the 25 Subnet. The Switch is at 192.168.26.x

Hope for help !

Best regards

Andreas
5 REPLIES
cenk sasmaztin
Honored Contributor
Solution

Re: PXE and DHCP Snooping

hi Andreas please send me sh run print your core switch and one edge switch
cenk

Raymon van der Meijden
Occasional Advisor

Re: PXE and DHCP Snooping

I had the same problem with DHCP on a Cisco 1841.

I tried
no dhcp-snooping option 82

And this helped.
Andreas Bärwald
Occasional Contributor

Re: PXE and DHCP Snooping

Hello,

here the configs. I have testet ist with check uand uncheck option 82

We testet ist for VLAN 1 192.168.25.1


Best regards

Andreas
Andreas Bärwald
Occasional Contributor

Re: PXE and DHCP Snooping

Here the message during the boot

PXE-E55: ProxyDHCP service did not reply on to request on Port 4011


Andreas

Re: PXE and DHCP Snooping

Have you tried :

no dhcp-relay