Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

PoE on 2650

Ryan1979
Advisor

PoE on 2650

HI Guys

from what i have read, PoE is enabled by default on 2650 switches. However if i run a

System Power Status

Maximum Power : Operational Status :
Power In Use : Usage Threshold (%) : 0

Its empty.

or

show power-management brief

Status and Counters - Port Power Status

| Power Configured Detection Power
Port | Enable Priority Type Status Class
----- + ------- -------- ---------------- ----------- ------


If i run commands like:
power threshold 80
Unable to create.

or

interface 1 power
Error setting value power for port 1.


Any ideas. Can i turn it on another way if its not already on. The Manual is very vague as it says it is on by default.
1 REPLY
Ryan1979
Advisor

Re: PoE on 2650

Blonde Moment (wish i was blonde).
I've checked the model and we have 2650, not 2650-PWR (and im guessing PWR stands for PWR over ethernet). What is the boss doing to me.