Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Port Channel between Cisco 3560x and HP GbE2c

SarathNair
Occasional Visitor

Port Channel between Cisco 3560x and HP GbE2c

 

Hello,

 

Iam newbee to HP switch,

 

Iam trying to configure a portchannel between Cisco 3560x and HP GbE2c Where i need to allow Multiple Vlans - 100,101&102 through this port bundling.

 

Enabled LACP on 21-24 ports.

Enabled Vlan Tagging on 1-16 & 21-24 ports.

 

Cisco side the port channel is coming up but HP side can you please guide me with configuration steps.

 

 

I had attached the Cisco,HP configurations and Network diagram which i am trying achive.

 

Can you please guide me what configurations do i need to do on 1-16 ports and 21-24 ports.

 

Thanks,

Sharath .

1 REPLY
Jasmine01
Occasional Contributor

Re: Port Channel between Cisco 3560x and HP GbE2c

Hi, don't worry! You can follow those steps to configure Cisco 3560X :

1. Boot the new switch

2. Delete Vlan.dat

3. Delete startup config if any

4. Reload

5. Copy paste startup config from old switch onto new switch under configuration mode

6. confirm all the vlans are created properly and ports assigned properly

7. copy run start