Port Forward on Secue Router 7102dl

[JasonYng]

Ok I got my router working but now I need to enable some port forwarding. We have some video servers on site that need to be accessed remotely. Now before with our dlink we just used the standard port forwarding it offered and it worked fine. For example:
xxx.xxx.xxx:99
was forwarded out with the same port.
We have a dynip account so by doing this we could just type for example:
example.dynip.com:99
and this would take us to that address on our network.

This does not work when I use the firewall wizard with the router. How do I accomplish the same exact setup I had with my dlink?

Thanks,
Jason

[JasonYng]

I guess I should have also mentioned I am using eth 0/1 to connect to our dsl modem and eth 0/2 to connect to our network.

Jason

[Joel Belizario]

Hi Jason,

I haven't had the chance to touch the routers as yet but have you tried calling support?

In my experience ProCurve support is generally better than standard HP support, normally you get access to an engineer first time instead of reaching a call centre and waiting for an engineer to call you back.

Good luck!