Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Port VLAN question

irsprint
Occasional Visitor

Port VLAN question

Hello I m looking to implement VLAN's at my work and came up with a problem as I m trying to Port VLAN (Private VLAN)

I want Port 14 of ICT3 VLAN to communicate with Default VLAN (Servers etc..)

I ve set Switch1 (2626) to:

Port 14
VLAN: ICT3
VLAN ID: 300
Untagged

Uplink port (26) Tagged to (B23) coreswitch (5406zl)

------------

Core switch to:

Default VLAN
Port B23
Untagged

ICT VLAN
Port 13
VLAN: ICT3
VLAN ID: 300
Tagged

I ve done this with the web console but do I need to do anything else? or is it possible with those switches?

I hope someone can help :)




1 REPLY
irsprint
Occasional Visitor

Re: Port VLAN question

forgot to add:

10.16.127.0/21

But I dont want to IP VLAN lookign at cisco I can private VLAN and told its Port VLAN with HP Procurve, thanks again