Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Port-groups on at 4204vl

Mikkel Nielsen
Occasional Advisor

Port-groups on at 4204vl

Hi.

Is it possigle to make a port group, or an alias for a group of interfaces on a HP 4204vl?

I would be mutch eaiser to configure VLANS for ie. VMWare Servers, with somting like this.
5 REPLIES
Shadow13
Respected Contributor

Re: Port-groups on at 4204vl

Hi,
Just for clarification, are you talking about Link Aggregation ?

Regards
Mikkel Nielsen
Occasional Advisor

Re: Port-groups on at 4204vl

No - its very simple.

I would like to define a group of ports, ie. called vmware, witch can be use for configure vlans.

Example:

(config)# port-group "vmware" member 1-7,13,17
(config)# vlan 30 tag vmware
Sietze Reitsma
Respected Contributor

Re: Port-groups on at 4204vl

the following commands will do the same

4202 vl(config)#vlan 20 name vmware
4202 vl(config)#vlan "vmware" tagged A1,A2,A7-A10

hopefully this helps


Mikkel Nielsen
Occasional Advisor

Re: Port-groups on at 4204vl

Yes, i know that, but then i have to document somewhere else witch ports that are connected to my vmware servers, the other way it would be self-describing.

But i guess that its not possible.
Franck Guenichot
Occasional Advisor

Re: Port-groups on at 4204vl

Hello,
this is possible with interface name command:

4204vl (config)# interface 1-8 name "vmware"

Then the interface 1 to 8 will be named "vmware"

You could then view these name with the "show name" command.