Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Pro Curve 4000 Export Mac Address Table

SOLVED
Go to solution
Mark Tilley The 2nd
Occasional Contributor

Pro Curve 4000 Export Mac Address Table

Is there a way to export the MAC-Addres table of all Macs learned to a text file?
2 REPLIES
Mohieddin Kharnoub
Honored Contributor
Solution

Re: Pro Curve 4000 Export Mac Address Table

Hi

Open your Hyper Terminal and connect to the Switch,

Go to menu, Transfer > Capture Text > then creat a new text file to save to.

Issue the command :
ProCurve> show mac-address

After that, menu again > Transfer > Capture Text > Stop.

Don't forget to assign points.

Good Luck

Science for Everyone
Matt Hobbs
Honored Contributor

Re: Pro Curve 4000 Export Mac Address Table

The 4000M does not have the show mac-address command.

From the serial console or telnet session, go to 6. Diagnostics, 4. Command Prompt. Then type in:

page
show bridge

The 'page' command will scroll the entire table so you don't need to press a button to scroll past each page.