ProCurve 2900

[AlexanderR]

Hi at all,

i´ve a question to stop DHCP broadcast.

The customer has 1*2900/24 and 1*2900/48 Port connected over a 10 Mbit leased line directly.

It is possible to stop DHCP requests over the two Sites?

regards,
Alexander

[Yan Henrichon]

If you want to stop DHCP request, means that you have two DHCP servers?

In that case, I will create two broadcast domain on each side of the line.

[AlexanderR]

Hi Yan,

I´ve on both side two DHCP Server.
The problem is there are two Subnets
255.255.248.0 and 255.255.255.0

The DHCP Server from the first side seploy IP to arong teh 2 Switches. with the wrong IP´s.

The DHCP Broadcast must stop connection over teh switches.

Regards,
Alexander

[Yan Henrichon]

"The DHCP Server from the first side seploy IP to arong teh 2 Switches. with the wrong IPà ´s."

Not sure of what this means. If I understand correctly, you have two DHCP on each subnet. Is that right?

Because we don't have that much information, I suggest this.

Create 2 vlans. Put one DHCP server in each vlan and enable routing to enable both vlan to communicate if this is desired.

hth... yan