Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

ProCurve 3400cl ACL with Logging

Oleg Sukharev
Valued Contributor

ProCurve 3400cl ACL with Logging

Hi

I have two HP ProCurve 3400cl switches. Firmware is the latest: M.10.76.

When I create basic ACL with logging enabled and try to assign it both switches say "Unable to apply access control list."

Commands I use to create and assign ACL look like this:

access-list 111 deny tcp host 10.10.10.10 any eq telnet log
access-list 111 permit ip any any
interface 16 access-group 111 in

If I create ACL without log option everything goes fine, it is applied.

Syslog server is configurered on switches.
Routing is enabled on one, disabled on another.

So is there anything I can check more or is it a firmware issue?

Thanks
2 REPLIES
Mauro Furini
Frequent Advisor

Re: ProCurve 3400cl ACL with Logging

Hi Oleg,
i have tried your configurations in a 6200yl with K.14.65 firmware and it works without any problem.
Sry but i don't have a 3400 to test it.
Mauro Furini
Frequent Advisor

Re: ProCurve 3400cl ACL with Logging

A clarification: in the 6200yl the acl was applied correctly, but the log on acl doesn't function at all(see my thread "acl deny & log")
Bye