ProCurve J8762A Switch 2600-8-PWR crashes on snmpwalk

[Christopher Dreher]

hello,

i got a problem with:
ProCurve J8762A Switch 2600-8-PWR
Software revision H.10.83

when i do:
snmpwalk -c public -v1 192.168.0.2 1.3.6.1.4.1.11.2.14.11.5.1.25.1

then the output stopps at:
SNMPv2-SMI::enterprises.11.2.14.11.5.1.25.1.2.4.1.11.1.1.128.194.0.0.3 = Gauge32: 0

and the switch crashes with:
Saved crash information:
Software exception at exception.c:373 -- in 'mSnmpCtrl', task ID = 0x177ffb0
-> Memory system error at 0x132b360 - memPartFree

is there any bugfix/workaround for that?

greetings christopher

[Shadow13]

Contact HP support for this please.
Make sure you provide them with the "show tech all" command output from the switch and the crash-data, you will find how to get these outputs in the support form available in procurve website