Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

ProCurve Manager CLI script

Pourl
Frequent Advisor

ProCurve Manager CLI script

Hi,

I'd like to create a CLI-script to configure a device-group. How I have to write the syntax for passwords?

password operator username admin
123
123

doesn't work

Paul
5 REPLIES
Natasha Samoylenko
Trusted Contributor

Re: ProCurve Manager CLI script

Hi

You made a little mistake (user-name parameter):
password operator user-name admin
123
123

May be this help.

Or you can use a special action in Policy Manager to configure operator or manager passwords.
Action would something like this:
category: Device Management,
subcategory: Communication Parameters or User Credentials
Michael_Breuer
Esteemed Contributor

Re: ProCurve Manager CLI script

Hi Paul,

on Procurve switches running software K.xx.xx (i.e. 5400) you can set the manager password in a single line:

Switch(config)#password manager plaintext

Cheers,

Michael
www.ingentive.net
Ingentive Networks GmbH
Pourl
Frequent Advisor

Re: ProCurve Manager CLI script

Hi Michael,

"password manager plaintext "

doesn't work...
"plaintext" is an invalid input...
Jeff Carrell
Honored Contributor

Re: ProCurve Manager CLI script

Paul said:"plaintext" is an invalid input"

What version of code is running?
Pourl
Frequent Advisor

Re: ProCurve Manager CLI script

Our PCM-Version is b.02.322
On the switch is the last fw running 5.72